Certification, Proven In Use, And Reliability Data

Three of the most discussed topics in the functional safety industry

Keywords: Certification, Proven in use, Prior use, Reliability data, Quality data, IEC 61508, IEC 61511, IEC 62061, EN 50402

This article is available in:  English. Please login to request translation.

Abstract:

Certification and proven in use can help us select safety equipment and devices that are compliant with safety standards and that help us build safety systems and solutions that meet the required safety criteria set out in those standards. Users of these devices and equipment only need to understand how to apply certification and proven in use in the correct way so that they can take full benefit and advantage of these solutions. In the end it will save them a lot of time, money and headaches. Therefore, the purpose of this paper is to explain what certification and proven in use is, and what role reliability data plays in these solutions. The paper will explain what what to pay attention to and how to apply certification, proven in use and reliability data. © 2009 Inside Publishing. All Rights Reserved.

Volume: 2009   Issue: 1
EUR 9.66
(Pages: 22, Words: 10738)

Readers of this article also bought

EUR 3.34

Implementing High Diagnostic Coverage for SIL 3 Systems on a Standard Microcontroller

Language: English

EUR 7.28

Determination of the Safety Integrity Level for a Safety Instrumented Function

Language: English

EUR 7.04

Handling Documentation Requirements in the Functional Safety Industry

Language: English

Articles by keywords

2oo4d accident accidents accumulative risk alarm annunciator alarp ansi/isa s.84 api 521 architecture asil asset management audit automatic code generation automatic documentation availability bayesian updating bpcs buncefield burner management system caex certification common cause common cause failures communication compliance component failure analysis consequence matrix content management control cost-benefit analysis cots demand mode diagnostic coverage diagnostics digital valve controller documentation emergency shutdown system en 50402 en 746 en/iec 60079–29–1 failure incident failure rate data failure rates fieldbus fire and gas fired equipment fmeda foundation sif full stroke functional modules functional safety gas detection gas sensors gas turbine global risk hardware hazard and operability analysis hazard and operability study hazop heterogeneous hipps iec 61131 iec 61131-3 iec 61508 iec 61511 iec 62061 iec 61508 incident investigation independent protection layer instrumentation and control iso 26262 knowledge-based system layer of protection layer of protection analysis life cycle lifecycle management liquiphant lock-up valve lopa management management of change markov memory metrological standards microcontroler mttfs namur 93 nfpa 72 oem online changes operator over spill protection overspeed protection p&id flowchart paag partial stroke partial stroke testing pha prior use process safety proof test interval proof testing proven in use qs9000 quality data quality management redundancy reliability reliability data reliability engineering reliability program requirements definition review risk graphs risk reduction risk reduction factor rule-based system safe-t-core safeguard safety safety goal safety instrumented function safety instrumented system safety instrumented systems safety integrity level safety lifecycle sensor poisoning sif signature test sil sil determination methods sil-capability sil verification silstroke sis sis design software solenoid valves spurious trip standardisation state transition modelling sulphur recovery tank farm test bench texas city thermal burner tolerable risk training tridefine type testing valve testing valves vdi 2180 verification